Samsung DVD-R135 - Manual (Page 33)

English - 33
S
ystem Setup
■ Press the RETURN or œ button to return
to the previous menu. Press the MENU
button to exit the menu.
NOTE
Display(Video) Options
This function depends on disc type. It may not work for
some disc types.
TV Aspect
Depending on the type of television you have, you may
want to adjust the screen setting. (aspect ratio)
• 4:3 LetterBox : Select when you want to see the total 16:9
ratio screen DVD supplies, even though
you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and
bottom of the screen.
• 4:3 Pan-Scan : Select this for conventional size TV when
you want to see the central portion of the
16:9 screen. (Extreme left and right side
of movie picture will be cut off.)
• 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
3D Noise Reduction (motion adaptive noise
reduction)
● On : Provides a cleaner picture through noise
reduction (for recording).
● Off : Normal
HDMI/DVI Resolution
This setting is used when the DVD Recorder is
connected by HDMI or DVI with Display devices (TV,
projector, etc).
• 576p : 720 x 576
• 720p : 1280 x 720
• 1080i : 1920 x 1080
Output selection
• Connect the DVD Recorder to your TV via a HDMI or DVI
cable. And set your TV's input to HDMI.
• Press the P.SCAN button while the DVD Recorder is in
Stop mode to select the HDMI output resolution as
follows:
➞ 576p ➞ 720p ➞ 1080i
Video DVD-Recorder
No Disc
Programme
Setup
TV Aspect : 16:9 Wide √ √
3D Noise Reduction : Off √ √
HDMI/DVI Resolution √ √
DivX(R) Registration √ √
Off
On
RETURN OK MOVE EXIT
Video DVD-Recorder
No Disc
Programme
Setup
TV Aspect : 4:3 Letter Box √ √
3D Noise Reduction : Off √ √
HDMI/DVI Resolution √ √
DivX(R) Registration √ √
4:3 LetterBox
4:3 Pan-Scan
16:9 Wide
RETURN OK MOVE EXIT
■ Menu screen will zoom out to 2/3 at
1080i.
NOTE
■ Progressive scan automatically activates
when HDMI is connected.
■ There will be no HDMI video and audio
outputs unless progressive scan function
is activated.
■ Consult your TV User’s Manual to find out
if your TV supports Progressive Scan. If
Progressive Scan is supported, follow the
TV User’s Manual regarding Progressive
Scan settings in the TV’s menu system.
■ The resolutions available for HDMI/DVI
output depend on the connected TV or
projector. For details, see the user’s
manual of your TV or projector.
■ When the resolution is changed it may
take a few seconds for a normal image to
appear.
■ If you set the HDMI output resolution
720p or 1080i, HDMI output provides
better picture quality.
■ DivX playback screen output can only be
done in 576p.
NOTE
Video DVD-Recorder
No Disc
Programme
Setup
TV Aspect : 16:9 Wide √ √
3D Noise Reduction : Off √ √
HDMI/DVI Resolution √ √
DivX(R) Registration √ √
RETURN OK MOVE EXIT
576p
720p
1080i
01094A-R135-XSS-ENG_17~37 3/28/06 4:19 PM Page 33