Samsung DVD-R135 - Manual (Page 44)

R
ecording
44 - English
4 Press the OK button.
If the timer settings overlap
The programmes are recorded in order of priority.
If timer recording is set for the first programme
and then again for the second programme and
both programmes overlap, the following message
will appear on the screen: “This setting is identical
with 1”The message shows that the first
programme has priority. After recording of the first
programme is complete, the second programme
starts being recorded.
To exit without saving the current setting
Press the MENU button.
To return to the previous menu
Press the RETURN button if you don’t want to set
a timer recording.
5 Turn the power off to finish the Timer
Recording setting. Timer Recording will
not work when the power is on.
● will appear on the front panel. It means that a
timer recording is registered.
● will blink if disc is not inserted.
■ The timer recording time may differ from
the set time depending on disc status
and overall timer recording status (for
example, recording times overlapping, or
when the previous recording ends within
2 minutes before the start time of the next
recording.)
■ You can make the Timer Recording up to
12 programmes.
NOTE
Editing the Scheduled
Record List
Follow these directions to edit the timer record list.
1 With the DVD Recorder in Stop mode,
press the
TIMER button.
Using the MENU button.
● With the DVD Recorder in Stop mode mode, press
the
MENU button.
● Press the …† buttons to select Programme , then
press the OK or √ button.
2 Press the OK or √ button.
3 Press the …† buttons to select the number
of the timer recording you want to edit, then
press the
OK or √ button.
● The Edit and Delete items are displayed.
Flexible Recording
(for Timer recording only)
In FR mode, the most suitable record mode is adjusted
automatically, according to remaining time on the disc and
length of the timer recording. This function is selected only
one mode in XP, SP, LP and EP modes. And you can use
this mode for timer recording.
The FR mode recording setup is the same as Timer
Recording. When setting the mode in step 3, set FR
Mode. (See page 43)
Programme DVD-Recorder
Title List
Playlist
Disc Manager
Programme
Setup
DVD-RW(VR)
Scheduled Record List √ √
RETURN OK MOVE EXIT
Scheduled Record List DVD-Recorder
DVD-RW(VR) Current Time 12:27
No. Source Day Start End Speed Edit
01 PR 01 01 SUN 13:07 14:07 SP √ √
02 PR 01 02 MON 12:08 14:08 SP √ √
03 : : -- √ √
RETURN OK MOVE EXIT
Edit
Delete
01094A-R135-XSS-ENG_38~46 3/28/06 4:22 PM Page 44