Samsung DVD-R135 - Manual (Page 87)

English - 87
Remote Control
Read the table of contents and then
find and read the section describing
your problem, follow the instructions
given.
Turn your DVD recorder off and on.
If the problem still persists, contact a
nearby Samsung service centre.
Checkpoint 1
Checkpoint 2
Checkpoint 3
Other problems.
Point the remote control at the remote
control sensor on your DVD recorder.
Allow for proper distance. Remove
obstacles between your DVD recorder
and the remote control.
Check whether the batteries are empty.
Check for the TV or DVD button.
Checkpoint 1
Checkpoint 2
Checkpoint 3
The remote control doesn't work.
A recorded disc is played with only the
subtitle and the audio signal which
were selected during recording.
Checkpoint 1
Is it possible to change a subtitle and an audio sig-
nal on a recorded disc?
Other
Press and hold down the PROG ( )
buttons on the front panel of the
DVD Recorder simultaneously for more
than 5 seconds with no disc in the
DVD Recorder. All settings including the
password will revert to the factory set-
tings. Do not use this unless absolutely
necessary. (Note that this function is pos-
sible only when no disc is inserted.)
Checkpoint 1
I forgot my password for parental supervision.
A
dditional Information
01094A-R135-XSS-ENG_84~88 3/28/06 4:55 PM Page 87