Samsung DVD-R135 - Manual (Page 40)

R
ecording
40 - English
5 Press the REC button .
To pause recording
Press the PLAY/PAUSE( ) button to pause a
recording in progress.
● Press the PLAY/PAUSE( ) button again to resume
recording.
● You can switch channels by pressing the PROG ( / )
buttons while recording pauses.
To stop recording
Press the STOP button to stop a recording in progress.
● When using DVD-RW/DVD-R discs, the message
‘Updating the disc information. Please wait for a
moment.’ is displayed.
Recording from external
equipment you are
watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1 Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
2 Press the OPEN/CLOSE button to close
the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 37)
3 Press the INPUT SEL. button to select the
input source according to the connection
you made.
The front panel display changes in the following
sequence:
➞ PR Number ➞ AV1 ➞ AV2 ➞ DV
If you connect a digital camcorder, press the
INPUT SEL. button to select DV .
(See page 41)
4 Press the REC MODE button repeatedly,
(or press the REC MODE button, then
press the …† button) to select the
recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
Before you start
■ You can not change the recording mode
while recording or Pause.
■ Recording will stop automatically if
there is no free space left for recording.
■ Up to 99 titles can be recorded onto a
disc.
■ Recording will stop automatically if a
copy protected image is selected.
■ DVD-RW discs must be formatted
before starting to record.
Most new discs are sold unformatted.
■ Do not use DVD-R authoring discs with
this DVD Recorder.
NOTE
Record Mode SP (02:12)
01094A-R135-XSS-ENG_38~46 3/28/06 4:22 PM Page 40