Philips Saeco ESPRESSO SG200E User Manual

Page 39

Advertising
background image

39

English

BEVANDA

01

ACQUA CAFFE’:

38

- Instant product:

It defines the quantity of instant product to be

dispensed.

Example:

‘005’ indicates that 5 units of instant product 3

will be used.

The quantity of instant product can be adjusted

from ‘0’ to ‘250’ with steps of 1.

- Instant water:

It defines the amount of water to be mixed with

powder instant product.

Example:

‘3’ indicates that water will be mixed with instant

product 3. ‘022’ indicates that 22 units of water

will be brewed with the instant product.

The amount of water can be adjusted from ‘0’ to

‘500’ with steps of 2.

Coffee beans C

Important

In case the sequence includes more instant

products, the sequence ‘INSTANT - WATER’ will

appear again.

If parameter programming concerning the

instant product (‘INSTANT - WATER’) is such to

extend powder brewing beyond water brewing,

the vending machine stops powder dosing as to

avoid an insufficient mixer rinsing and emits a

beep. Check again the parameters set, in order

to obtain a correct dispensing. Powder

dispensing must end a few instants before the

water dispensing so as to allow a good mixer

rinsing.

- Coffee Water:

It defines the quantity of coffee to be brewed.

Example:

‘38’ indicates that 38 water units will be brewed.

The quantity of coffee can be adjusted from ‘0’

to ‘500’ with steps of 2.

BEVANDA

A

SOLUBILE 3:

005

BEVANDA

A

ACQUA SOL.3:

022

- Sugar

It defines the quantity of sugar to be brewed with

the beverage.

The following table shows the result of the

different settings.

Setting

0

1

2

3

4

NO

Sugar in the

beverage without

preselection

No sugar

1

2

3

4

No Sugar

Sugar in the

beverage with

preselection

Preselected quantity

Preselected quantity

Preselected quantity

Preselected quantity

Preselected quantity

No Sugar

- Beverage check:

It allows you to perform brewing tests on the

beverage just set.

By pressing ENTER the display shows ‘PRESS

KEY’ and you can choose which key to press

based on the type of brewing test:

- Key 2 Full beverage;

- Key 3 Beverage without cup, sugar and

stirrer;

- Key 4 Only water;

- Key 5 Only powder.

TIMETABLE SETTING

The items of the TIMETABLE SETTING menu

are:

- Never free

Products and beverages supplied should be

paid.

- Always free

Products and beverages supplied are free.

Important

When the Time Keeper module is present, it is

possible to set:

- washing times;

- witching on and off times;

- differentiated pricing times;

- free dispensing times.

Advertising