Philips Saeco ESPRESSO SG200E - Manual (Page 51)

51
English
- manually rotate using the wrench supplied
with the machine until the lower filter is flush
with the cup (fig. 57).
- unscrew screw (1) and replace filter (2)
(fig.57).
- reassemble all the parts following the reverse
order.
Important
Carefully blot the upper and lower filter and blow
with compressed air.
9.3 Adjustments
9.3.1 Dose and grinding
adjustment
The vending machine is delivered having
standard values set by the manufacturer, in
particular:
- around 7.0 g of coffee powder
In order to make the most of the product used,
check the following:
- ground coffee quantity adjustment. Modify the
quantity used by means of the two levels of
adjustment:
1- coarse adjustment: release the adjustment
lever from the rack and place the dragging
tooth of the inner bulkhead on one of the 4
positions available, which indicate the basic
quantity area (6 g – 7 g – 8 g – 9gr) (fig.58A)
2- fine adjustment: engage the adjusting lever
into the rack slot corresponding to the dose
you require. (fig.58B).
- coffee grinding adjustment. Turn the rack
(fig.59) until you get the grinding. After any
adjustment three selections are necessary
before the new setting becomes effective.
fig.57
fig.58
fig.59
A
B