Sony HT-SF370 - Manual (Page 20)

20 US
4: Connecting the audio/
video components
This section describes how to hook up your
components to this receiver. Before you begin,
see “Component to be connected” below for
the pages which describe how to connect the
audio/video components.
Before connecting the cords, be sure to
disconnect the AC power cord.
After hooking up all your components,
proceed to “5: Connecting the antennas” (page
24).
Component to be connected
The following illustration shows how to
connect audio components such as Super
Audio CD player or CD player and DIGITAL
MEDIA PORT adapter.
You can also view the images on the TV
screen by connecting the video output of the
DIGITAL MEDIA PORT adapter to the video
input of the TV. However, depending on the
DIGITAL MEDIA PORT adapter, video
output may not be possible.
* The type of connector varies depending on the
DIGITAL MEDIA PORT adapter.
For details, refer to the operating instructions
supplied with the DIGITAL MEDIA PORT
adapter.
How to hook up your
components
To connect See
TV page 19
Audio components
• Super Audio CD player,
CD player
• DIGITAL MEDIA PORT
adapter
page 20
Components with HDMI jack page 21
Video components
• DVD player, DVD recorder
• Satellite tuner, cable television
tuner
page 23
Connecting audio components
AM
ANTENNA
AUTO
CAL MIC
HDMI
EZW-T100
DC5V 0.7A MAX
DVD IN BD IN SAT/CATV IN TV OUT
ARC
AUDIO IN
VIDEO
R
SA-CD/CD
COAX IN
SAT/CATV TV
OPT IN OPT IN AUDIO IN
TV
DIGITAL L
DMPORT
Super Audio CD player,
CD player
Audio signal
A
A Audio cord (not supplied)
B Video cord (not supplied)
B
TV
DIGITAL MEDIA
PORT adapter
l : Signal flow