Sony S-FRAME DPF-VR100 - Manual (Page 48)

48 GB
Notes
• Operation is not guaranteed with all TVs.
• If you connect a TV, the LCD screen of the
photo frame turns off.
• If the photo frame is connected to a TV
with an HDMI cable, audio, operating
sound and alarm will be output from the
TV, not from the photo frame. Adjust the
volume on the TV.
• If [Control for HDMI] is set to off in the
TV settings, the input is not changed
automatically. The setting method differs
depending on the TV. Refer to the
operating instructions supplied with the
TV.
• If you are using a TV that does not support
control for HDMI or the input is not
switched automatically, change the TV’s
input manually.
• The method used for changing the input
differs depending on the TV. Refer to the
operating instructions supplied with the
TV.
• Do not connect or disconnect the HDMI
cable while images are added to the internal
memory or they are being exported or
deleted. In such a case, these operations are
cancelled.
Using the remote control of a TV
to operate the photo frame
If your TV supports the control for HDMI
function, you can use the remote control of
your TV to operate the photo frame.
Notes
• We cannot guarantee operation with all types of
TVs.
• When the remote control of your Sony TV is
equipped with a link menu button, you can use the
remote control to operate the photo frame.
• To operate the photo frame, the %5$4, [Enter],
[Return] buttons support the control for HDMI.
• If the control for HDMI setting of your TV is off,
TV’s remote control operation for the photo frame
is not available. Settings differ depending on the TV
you use. For details, refer to the operating
instructions supplied with your TV.
• If [Control for HDMI] is set to [OFF] on the photo
frame, TV’s remote control operation is not
available.
Basic operations of the photo frame
with a TV’s remote control
• The cursor is moved by pressing %5$4
when the cursor is displayed on the screen,
for example, when a list or menu is
displayed.
• When no cursor is displayed, for example, in
single view, press $. The operation panel of
the photo frame is displayed on the TV
screen. Press
%5$4 on the TV’s
remote control to select the desired button
then press
[ Enter ] .
• To hide the operation panel, select on the
upper right corner of the operation panel, or
press the BACK button on the photo frame
or on the remote control.