Sony S-FRAME DPF-VR100 - Manual (Page 54)

54 GB
Error reading the Memory Stick. /
Error reading the CompactFlash
card. / Error reading the SD
Memory Card. / Error reading the
xD-Picture Card. / Error reading
the internal memory./ Error reading
the External Device. • An error has occurred. If this error message is displayed
frequently, check the status of the memory card or external
device with a device other than the photo frame.
• For an external device:
The external device may be write-protected. Cancel the
write-protection setting for the device you are using. The
internal memory of a digital camera may be write-
protected.
• For an internal memory:
Initialize the internal memory.
Note
When you initialize the internal memory, please note that all the
image files imported to the internal memory are deleted.
Write error on the Memory Stick. /
Write error on the CompactFlash
card. / Write error on the SD
Memory Card. / Write error on the
xD-Picture Card. / Write error on
the internal memory./ Write error
on the External Device.
The Memory Stick is read only. • A “Memory Stick-ROM” is inserted. To save the images,
use the “Memory Stick” recommended.
The Memory Stick is protected. • A protected “Memory Stick” is inserted. To edit and save
the images, use an external device to remove protection.
Memory card format not supported. • For a memory card, use your digital camera or other device
to format the memory card.
• For the internal memory, initialize it with the photo frame.
Note
When you initialize the media, all the files on the media will be
deleted.
Cannot open the image. • The photo frame cannot display or open an image file
whose format is not supported.
No more USB hubs can be
connected. • Connect the device directly to the photo frame, or use a
device without a built-in USB hub.
Incompatible USB device. Check
device’s USB settings. • A mass-storage-incompatible device is connected or the
USB setting on an external device is not set for mass
storage. Connect to a mass-storage-compatible device or
check the USB setting and change it to mass storage on the
external device.
Error message Meaning/Solutions