Sony S-FRAME DPF-VR100 - Manual (Page 58)

58 GB
Connecting a digital camera or other external device
Photo frame
An image was
deleted
accidentally.
—
c An image cannot be recovered once it is
deleted.
Symptom Check item Cause/Solutions
The camera is
connected but
nothing is
displayed. • Is the cable connected
properly?
c Connect the cable properly.
• Is the photo frame turned
on?
c Turn both the photo frame and the camera.
Nothing happens
even if the USB
cable is
disconnected and
then re-connected.
—
c An over current error may have occurred
with the photo frame. Turn off the power
of the photo frame and turn it on again.
c The USB device may not be compatible
with the photo frame.
Images are not
displayed on the
TV screen or LCD
screen. • Is the input of the TV set to
external input?
c Even if the input of the TV is not set to the
photo frame, images may sometimes not
be displayed on the TV screen or LCD
screen if an HDMI cable is connected.
c Change the input of the TV to the photo
frame, or disconnect the HDMI cable
from the photo frame and switch the
display to the LCD screen.
Symptom Check item Cause/Solutions
Nothing happens
even if you operate
the photo frame.
—
c Push the reset switch on the back of the
photo frame using a long, thin object such
as a pin, etc. (page 9).
The photo frame
does not start.
—
c Use maintenance mode to initialize the
system of the photo frame (page 29).
Symptom Check item Cause/Solutions