Sony SA-KL50W - Manual (Page 5)

Getting Started
5 GB
(continued)
Hooking Up the System
Overview
Use either the HIGH LEVEL or LOW LEVEL terminal
of the speaker system when you connect the KL-50W
series TV or a separate amplifier.
• If you connect the KL-50W series TV, connect the
LOW LEVEL terminal of the speaker system to the
audio line out jacks of the KL-50W using the
supplied audio connecting cord.
• If your amplifier has one of the following types of
output jacks, connect the LOW LEVEL terminal of
the speaker system to the amplifier jacks using the
supplied audio connecting cord.
— LINE OUT jacks
— MONO OUT jack
— MIX OUT jack
— SUB WOOFER output jacks
— SUPER WOOFER output jacks
If the amplifier has a single output jack (e.g. MONO
OUT or MIX OUT jack), connect the other end of the
cord to the L INPUT jack of the LOW LEVEL
terminal of the speaker system.
• If your amplifier does not have any of the above
mentioned output jacks, connect the speaker
terminals of the amplifier to the HIGH LEVEL
terminal of the speaker system instead.
• If your amplifier has the Dolby Pro Logic Surround
system, connect the center speaker output of the
amplifier to the speaker system’s CENTER SPEAKER
terminal as well.
HIGH LEVEL LOW LEVEL
Rear side
Speaker
system Amplifier
TV
Do NOT connect both the low level and high level
terminals
– +
–
+
CENTER SPEAKER
Note
Use either the LOW LEVEL or HIGH LEVEL terminals for
connection. Using both may result in a malfunction.
Before you get started
• Turn off the power of the KL-50W series TV or
amplifier and the speaker system before making any
connections.
• Use the audio connecting cords supplied with the
other equipment. If there are not enough audio
connecting cords to make the necessary connections,
you need to purchase optional audio connecting
cords.
• Be sure the connections are secure to avoid noise.
• Connect the mains lead of the speaker system to a
mains outlet.