Sharp UX-B800SE - Manual (Page 22)

Fax to E-mail Transmission
20
enter the desired 2-digit Speed Dial
number, and go to Step 8.
8 Return to Step 2 to store another e-
mail address, or press to exit.
Editing and clearing stored e-
mail addresses
To make changes to a previously stored
e-mail address, or to clear an address,
follow these steps:
1 Press , , then .
2 Press the key in which the address
is stored (Rapid Key or A, B, or C
key), or press and enter the
2-digit Speed Dial number in which
the address is stored.
(You can also press or
until the name or address appears
and press .)
Display: [1=EDIT, 2=CLEAR]
3
Press for EDIT or for
CLEAR.
•
If you selected CLEAR, go to Step 8.
4 If you selected EDIT, make the
desired changes to the address.
•
Press or to move the
cursor to the character(s) you wish to
change, and then press the
appropriate letter or number key. The
new character will replace the old
character.
STOP
FUNCTION
SPEED DIAL
•
If you do not wish to change the
address, go directly to Step 5.
5
Press .
6 Make the desired changes to the
name.
•
If you do not wish to change the
name, go directly to Step 7.
7
Press .
8 Return to Step 2 to edit or clear
another address, or press to
exit.
STOP
Fax to E-mail Transmission
Follow the steps below to send a
document to an e-mail recipient.
♦
The document will be sent as an
attachment to an e-mail message.
♦
You can specify the recipient by
directly entering an e-mail address, or
by selecting an address that has been
stored as explained in the previous
section.
1 Flip up the feeder cover (
➊) and
adjust the document guides to the
width of your document (
➋).
1
2