Sharp UX-B800SE - Manual (Page 30)

Sending a Fax: Auto Dialing
28
display will show the next available
Rapid Key or Speed Dial number. If
that number is acceptable, press
and go to Step 8. If not, press
the desired Rapid Key, or press
and enter the desired 2-digit
Speed Dial number, and go to Step
8.
8 Return to Step 2 to store another
number, or press to exit.
Editing and clearing auto-dial
numbers
To make changes to a previously stored
auto-dial number, or clear a number,
follow these steps:
1
Press , , then .
2 Press the Rapid Key (or press
and enter the 2-digit Speed
Dial number) of the number that you
want to edit or clear. (You can also
press or until the
number appears and press .)
Display: [1=EDIT, 2=CLEAR]
3 Press for “EDIT” or for
“CLEAR”.
SPEED DIAL
STOP
FUNCTION
SPEED DIAL
•
If you selected “CLEAR”, go to Step
7.
4 If you selected “EDIT”, make the
desired changes to the number.
•
Press or to move the
cursor to the digit or digits you wish
to change, and then enter the new
digit. The new digit will replace the
old digit.
•
If you do not wish to change the
number, go directly to Step 5.
5 Press .
6 Make the desired changes to the
name.
•
Press or to move the
cursor to the letter or letters you wish
to change, and then press the
appropriate letter key. The new letter
will replace the old letter.
•
If you do not wish to change the
name, go directly to Step 7.
7 Press .
8 Return to Step 2 to edit or clear
another number, or press to
exit.
STOP