Sharp UX-B800SE - Manual (Page 41)

Distinctive Ring (Requires Service)
39
6. Special Fun
c
tions
To delete all calls from the list, hold
down for 3 seconds while viewing
any number in the list.
Blocking voice calls
If you have turned on Caller ID, the Anti
Junk Fax function will block voice calls
as well as faxes from your specified Anti
Junk Number (see p. 40).
Note: This function cannot be used if
you are using Distinctive Ring.
Distinctive Ring
(Requires Service)
Important: To use this function, you
must subscribe to a Distinctive Ring
service from your telephone company.
The machine may not be compatible
with some Distinctive Ring services.
Distinctive Ring is a service offered by
some local telephone companies
whereby they assign an additional
second number to your regular single
line. The second number rings
differently from your normal number.
If you subscribe to a Distinctive Ring
service, you can set the machine to
automatically answer when your second
number is called. This allows you to use
the second number as an exclusive fax
number.
1
Press , then until
[ OPTION SETTING] appears .
2 Press , then until
[ DISTINCTIVE RING] appears.
FUNCTION
3 Select the ring pattern below that
matches the ring pattern of your
second number. (To use your first
number as a fax number, select
STANDARD RING.)
4 Press to exit.
5 Press to set the reception
mode to AUTO.
♦
To use Distinctive Ring, the reception
mode must be set to AUTO. When
your designated fax number is dialed,
the machine will automatically answer
and begin reception after two rings. If
one of your other numbers is dialed,
the machine will ring; however, it will
not answer.
RING PATTERN 1
Two short rings
RING PATTERN 2
One short, one long, and
one short ring
RING PATTERN 3
Two short rings and one
long ring
RING PATTERN 4
Three very short rings
(Canada only)
RING PATTERN 5
Two very short rings
(Canada only)
STANDARD RING
Your standard (normal)
ring pattern
OFF SETTING
Turn distinctive ring off
STOP
RESOLUTION/
RECEPTION MODE