Silex technology SDZ-330 - Manual (Page 11)

COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 21 20
Operating Your Camera
3. Change the status of the selected feature using the LEFT or RIGHT button.
4. When completed, move the arrow indicator to 'EXIT' and press the SET button.
Use this feature to designate a name for the camera, which will display on the
monitor screen.
1. Press the SET button to display the main setup menu and move the arrow
indicator to 'CAM TITLE' using the UP or DOWN button.
2. Set 'CAM TITLE' to 'ON' using the LEFT or RIGHT button.
Cam Title
• If the CAM TITLE feature is set to 'OFF',
the name will not displayed in the monitor.
Notes
• Features marked with a have an accessible submenu.
• Access the submenu by pressing the SET button.
Notes
Change the status using the
LEFT or RIGHT button.
Select feature using the UP
or DOWN button.
3. Press SET button.
4. You can enter up to 20 characters.
Move the cursor to the character entry field using the LEFT or RIGHT
button.
Use UP, DOWN, LEFT, and RIGHT buttons to select a desired character.
Press the SET button to confirm selection of the blinking character. The
character is then saved, and the cursor in the entry field moves to the
next position.
Repeat steps through
until the desired name has been entered.
• Correcting Mistakes
Move the cursor to 'CLR' and press the SET button to clear the entire entry.
To modify one character, use
or to position the cursor above the character
to be modified and click the SET button after selecting the character to enter.
Notes