Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W - Manual (Page 100)

38 Appendix
Users Manual CX2
- SNMP parameter
- NetBEUI/NetBIOS parameter
Topic Explain Factory Default
NetBEUI Protocol Enable/Disable NetBEUI protocol operations ENABLE
NetBIOS over TCP Enable/Disable NetBIOS over TCP protocol operations ENABLE
Computer Name
Specify a computer name. The name set here is shown
as a computer in W indows Explorer. The name must
be different from those of other computers. PRxxxxxx
xxxxxx is lower 6 digits
of Ethernet Address
W orkgroup
Specify the workgroup that this print server belongs to.
Enter the default workgroup name or an existing
workgroup name. A new workgroup name that does not
exit in the network is not shown as W orkgroup.
PRINTSERVERS
Comment
Set the description of the print server. The information
set here is shown as the description of the print server
in W indows Explorer.
PRICOM C-6400W
Brower Master Enable/Disable Brower Master operations ENABLE
Topic Explain Factory Default
Authentic Community
Specify the authentication community name of SNMP.
This community name is authenticated when an SNMP
set request is received.
public
Trap Community
Specify the trap community of SNMP. This community
name is used when the print server send a trap.
public
Trap Address(IP)
Specify the destination IP address of the SNMP trap.
The value is a four-part series of numbers separated by
decimal points. Such as "xxx.xxx.xxx.xxx". When the
value is "0.0.0.0"(default), this item is disabled and a
trap will not be generated in any case.
0.0.0.0
SysContact
Specify the SysContact of the MIB-2 object. The e-mail
address of the network administrator is used.
none
SysName
Specify the SysName of the MIB-2 object. The host
name or domain name of the print server is used.
none
SysLocation
Specify the SysLocation of the MIB-2 object. The
location of the print server is used.
none
Enable Authen Trap
Select whether to allow or disallow the "Enable Authen
Trap" of the MIB-2 object. If a violation for the
community occurs "allow" is the setting, the SNMP trap
is sent to the IP address specified in "TRAP Address"
2