Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W - Manual (Page 93)

31 Appendix
Users Manual CX2
TELNET
After the IP address has been configured, you can configure the TCP/IP, SNMP parameters in the PRICOM C-
6400W using TELNET. You can configure the PRICOM C-6400W using a command line. The following is
example for each menu.
- The default login name = root, Password = (none))
- The following is an example of TELNET.
PRICOM C-6400W Ver x.x.x TELNET server.
Copyright (C) 2003 silex technology, Inc.
login: root
'root' user needs password to login.
password:
User 'root' logged in.
No. Item Value (level.1)
----------------------------------------------------------------------
1 : Configure General
2 : Configure TCP/IP
3 : Configure NetBEUI/NetBIOS
4 : Configure SNMP
96 : Display Status
97 : Reset Settings to Defaults
98 : Restart Print Server
99 : Exit
Please select(1 - 99)?