Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W - Manual (Page 84)

22 Appendix
Users Manual CX2
3. Select
Create a new port
in
Select a
Printer Port
and create a new port.
Select
LPR Port
and click
Next
.
- If the destination print port was
created when installing the PRICOM,
s e l e c t t h e p o r t f r o m Use the
following port and click Next .
4. At Name or address of server
providing lpd
, type in the IP address
which was set to the PRICOM. At
Name of printer or print queue on
that server
, add
lp
and click
OK
.
5. At Install Printer Software , select the
printer driver to be used. Click Next .
6. If
Use existing Driver
appears, select
Keep existing driver (recommended)
or
Replace existing driver
. Click
Next .