Silex technology Print/Scanner/Storage Wireless Server PRICOM C-6400W - Manual (Page 27)

2-16 PRICOM C-6400W
Users Manual CX2
<Infrastructure mode>
In Infrastructure mode the PRICOM C-6400W connects through an access point.
An Access point allows communication between wired and wireless environments.
Connect the PRICOM C-6400W to the printer/scanner/MFP
using a USB cable.
- The following are the two ways to put the PRICOM C-6400W into Infrastructure mode.
1. Set the mode to be Infrastructure during the configuration.
2. After boot, hold down the push switch.
Access Point