SMC Networks SMC7904BRA - Manual (Page 20)

H
ARDWARE
D
ESCRIPTION
2-3
The Barricade ADSL Router includes an LED display on the front panel
for system power and port indications that simplifies installation and
network troubleshooting. It also provides the following ports on the rear
panel:
Figure 2-1. Rear Panel
Item Description
LAN Ports Fast Ethernet ports (RJ-45). Connect devices on your local area
network to these ports (i.e., a PC, hub, or switch).
Power
button
Press this button to turn on/turn off the Barricade ADSL
Router.
Reset Button Use this button to reset the power and restore the default
factory settings. To reset without losing configuration settings,
see “Reset” on page 4-64.
Power Inlet Connect the included power adapter to this inlet.
Warning: Using the wrong type of power adapter may damage
the Barricade ADSL Router.
ADSL Port WAN port (RJ-11). Connect your ADSL line to this port.
RJ-45 LAN ports Power
Switch
Button
Reset
Button Power
Connector
RJ-11
Port