SMC Networks SMC7904BRA - Manual (Page 22)

ISP S
ETTINGS
2-5
ISP Settings
Please collect the following information from your ISP before setting up
the Barricade ADSL Router:
• ISP account user name and password
• Protocol, encapsulation and VPI/VCI circuit numbers
• DNS server address
• IP address, subnet mask and default gateway (for fixed IP users only)
Connect the System
The Barricade ADSL Router can be positioned at any convenient location
in your office or home. No special wiring or cooling requirements are
needed. You should, however, comply with the following guidelines:
• Keep the Barricade ADSL Router away from any heating devices.
• Do not place the Barricade ADSL Router in a dusty or wet
environment.
You should also remember to turn off the power, remove the power cord
from the outlet, and keep your hands dry when you install the Barricade
ADSL Router.
Connect the ADSL Line
Connect the supplied RJ-11 cable from the ADSL Microfilter/Splitter to
the ADSL port on your Barricade ADSL Router. When inserting an ADSL
RJ-11 plug, be sure the tab on the plug clicks into position to ensure that it
is properly seated.