SMC Networks SMC7904BRA - Manual (Page 27)

C
ONFIGURING
C
LIENT
PC
3-2
TCP/IP Configuration
To access the Internet through the Barricade ADSL Router, you must
configure the network settings of the computers on your LAN to use the
same IP subnet as the Barricade ADSL Router. The default IP settings for
the Barricade ADSL Router are:
Note: These settings can be changed to fit your network requirements,
but you must first configure at least one computer to access the
Barricade ADSL Router’s web configuration interface in order to
make the required changes. (See “Configuring the Barricade ADSL
Router” on page 4-1 for instruction on configuring the Barricade
ADSL Router.)
IP Address 192.168.2.1
Subnet Mask 255.255.255.0
DHCP function Enable
DHCP IP Pool Range 192.168.2.2 to
192.168.2.254