Sony MDR DS5000 - Manual (Page 23)

23 GB
Operation
DOLBY DIGITAL
VIRTUAL
DECODE MODE
L C R
LS RS
DOLBY SURROUND
BALANCE
POWER
VOL
Raise the
volume
Lower the
volume
MIN MAX
PHONES LEVEL
Indicator light Output mode (surround effect)
VIRTUAL SURROUND
Virtual surround effect where the sound seems to be coming from
not only two front speakers (right and left), but also from one center
speaker, two rear speakers (right and left), and a subwoofer (when
DOLBY DIGITAL is lit).
The digital surround processor automatically identifies and
processes according to the format of the input audio signal.
When DOLBY DIGITAL indicator is on: Audio recorded in Dolby
Digital 5.1ch format is being processed.
When DOLBY SURROUND indicator is on: Audio recorded in Dolby
Surround (Pro Logic) format is being processed.
Note
During Dolby Digital input, monaural sound sources which cannot be processed with the
surround effect are automatically identified and played back through two channels (left and
right), even when VIRTUAL SURROUND mode is selected. In this case, both the DOLBY
DIGITAL and DOLBY SURROUND indicators are turned off.
7
Adjust the volume.
To adjust the volume of headphones (sold separately) connected to the
PHONES jack
Turn PHONES—LEVEL to adjust the volume.
Raise the
volume Lower the
volume
(Continued)