Rate limit configuration, Rate limit configuration -114, Command usage – SMC Networks TigerSwitch User Manual
Page 164: Command attributes
C
ONFIGURING
THE
S
WITCH
3-114
CLI - This example sets and displays Fast Ethernet and Gigabit Ethernet
granularity.
Rate Limit Configuration
Use the rate limit configuration pages to apply rate limiting.
Command Usage
•
Input and output rate limit can be enabled or disabled for individual
interfaces.
Command Attributes
•
Port/Trunk – Displays the port number.
•
Rate Limit Status – Enables or disables the rate limit. (Default:
Disabled)
•
Rate Limit Level – Sets the rate limit level. (Range: 1-255: Default: 255)
Note: Actual rate limit = Rate Limit Level * Granularity
Console(config)#rate-limit fastethernet granularity 512
Console(config)#rate-limit gigabitethernet granularity 33300
console#show rate-limit
Fast ethernet granularity: 512
Gigabit ethernet granularity: 33300
Console#