SMC Networks TigerSwitch - Manual (Page 269)

G
ENERAL
C
OMMANDS
4-27
General Commands
enable
This command activates Privileged Exec mode. In privileged mode,
additional commands are available, and certain commands display
additional information. See “Understanding Command Modes” on
page 4-8.
Syntax
enable [level]
level - Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Table 4-6 General Commands
Command Function Mode Page
enable Activates privileged mode NE 4-27
disable Returns to normal mode from privileged mode PE 4-28
configure Activates global configuration mode PE 4-29
show history Shows the command history buffer NE, PE 4-29
reload Restarts the system PE 4-30
end Returns to Privileged Exec mode any
config.
mode 4-31
exit Returns to the previous configuration mode, or
exits the CLI any 4-31
quit Exits a CLI session NE, PE 4-32
help Shows how to use help any NA
? Shows options for command completion
(context sensitive) any NA