SMC Networks TigerSwitch - Manual (Page 271)

G
ENERAL
C
OMMANDS
4-29
Example
Related Commands
enable (4-27)
configure
This command activates Global Configuration mode. You must enter this
mode to modify any settings on the switch. You must also enter Global
Configuration mode prior to enabling some of the other configuration
modes, including Interface Configuration, Line Configuration, and VLAN
Database Configuration. See “Understanding Command Modes” on
page 4-8.
Default Setting
None
Command Mode
Privileged Exec
Example
Related Commands
end (4-31)
show history
This command shows the contents of the command history buffer.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Console#disable
Console>
Console#configure
Console(config)#