Woodstock Combination Model - Manual (Page 20)

-17-
ADJUSTMENTS
General
The Model W1676 is capable of a wide variety of
sanding operations. The sanding belt can be
positioned in a variety of angles ranging from 0-
90° and can accommodate the working table in
the vertical position. The sanding disc can
accommodate the working table at a variety of
angles ranging from 0-45°. In all, the Model
W1676 will be a welcome addition to the home
or commercial workshop. The following section
will go through the above adjustment steps.
Wear safety glasses dur-
ing the entire adjust-
ments process. Failure to
comply may result in
serious personal injury.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Disconnect power to the
machine when perform-
ing any maintenance,
assembly or adjust-
ments. Failure to do this
may result in serious
personal injury.
!