Woodstock SHOP FOX W1712 User Manual

Model w1712 ***important update

Advertising
background image

Model W1712

***IMPORTANT UPDATE***

Applies to Models Mfg. Since 3/12

& Owner's Manual Printed August, 2003

Phone #: (360) 734-3482 • Tech Support: [email protected] • Web: www.shopfox.biz

COPYRIGHT © MARCH, 2012 BY WOODSTOCK INTERNATIONAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT

THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.

#14867TS Printed in Taiwan

We recently made the following changes to the Model W1712:

• Obtained CSA Certification for the machine.

• Changed the disc dust hood to the correct part number.

These changes do not affect how the machine assembles or functions. In addition to the changes we

made to the machine, we are providing updated information about machine specifications, machine

safety, circuit requirements, electrical grounding, and machine electrical wiring.

Aside from the information contained in this update, all other content in the owner's manual applies

to this machine. For your own safety, you MUST read and understand this update and the applicable

owner's manual. If you have any further questions about this manual update or the changes made to the

machine, contact our Technical Support.

Figure 1. Disc dust hood is part number 6

(changed from part number 70).

6

For Your Own Safety Read Instruction

Manual Before Operating Sander

a) Wear eye protection.

b) Support workpiece with miter

gauge, backstop, or worktable.

c) Maintain

1

16

" in maximum clear-

ance between table and sanding

belt or disc.

d) Avoid kickback by sanding in

accordance with directional

arrows or against rotation of

sandpaper.

255023

Advertising