Woodstock SHOP FOX W1712 - Manual (Page 25)

ASSEMBLY
-13-
Figure 7. Installing table.
Figure 8. Installed tilting knobs.
The sanding belt table comes assembled on the
W1712, but the sanding disc table needs to be
installed on the sander.
To install the sanding disc table, do these
steps:
1. KEEP THE SANDER UNPLUGGED!
2. Align the sanding table mounting holes
with the threaded holes in the bracket.
3. Secure the sanding table, as shown in
Figure 7, with the cap screws supplied in
the table hardware bag.
4. Install the table tilt control knobs ( Figure
8).
Installing Table