Woodstock SHOP FOX W1712 - Manual (Page 21)

ASSEMBLY
-9-
Layout and inventory the package contents list-
ed below and familiarize yourself with the
components to ease assembly.
A. Sander Unit ....................................1
B. Cabinet Stand ..................................1
• Side Panel L/R ................................2
• Front/Rear Panel ..............................2
C. Table Hardware Bag ..........................1
- Cap Screw 5 ⁄
16
"-18 x 3 ⁄
4
" ................2
- Lock Nut 5 ⁄
16
"-18 ..........................2
- Flat Washer 1 ⁄
4
" ..........................2
- Knob Bolt M6-1 x 15......................2
D. 12" Disc Sanding Table ........................1
E. Belt Sanding Table ............................1
F. Main Hardware Bag ............................1
• Cabinet Stand Hardware Bag ................1
- Hex Bolt 5 ⁄
16
"-18 x 3 ⁄
8
" ..................8
- Hex Bolt 5 ⁄
16
"-18 x 1" ....................2
- Hex Nut 5 ⁄
16
" ..............................8
- Flat Washer 5 ⁄
16
" ........................18
- Lock Washer 5 ⁄
16
"........................10
- 6MM Allen Wrench........................1
• Floor Pad Bag ..................................1
- Floor Pads ................................4
- Phillips Head Screw
3 ⁄
16
"-18 x 5 ⁄
8
" ....4
- Flat Washer 5 ⁄
16
" ..........................4
- Hex Nut 5 ⁄
16
" ..............................4
• Accessories Bag ................................1
- Belt Tension Lever ......................1
- Screwdriver................................1
- Knob Bolt M8-1.25 x 20 ..................1
- Stop Fence ................................1
G. Miter Gauge Assembly ........................1
Item Qty.
The Model W1712 was carefully packed when it
left our warehouse. If you receive it damaged or
missing any parts, please contact Woodstock
International Service and Support at 1-360-734-
3482 or send e-mail to:
[email protected].
Read and understand this
entire instruction manual
before performing any
operations with your
machine. Serious personal
injury may occur if safety
and operational informa-
tion is not understood
and followed.
The Model W1712 is a
heavy machine at 165
lbs. Use assistance
when lifting or moving
the machine.
UNPLUG power cord
before you do any assem-
bly or adjustment tasks!
Otherwise, serious per-
sonal injury to you or
others may occur!
Inventory
Unpacking
ASSEMBLY
Figure 3. Inventory.
A
F
D
C
G
E
B