Woodstock SHOP FOX W1712 - Manual (Page 23)

ASSEMBLY
-11-
Figure 5. Rubber feet installed.
Figure 4. Cabinet assembly.
The Model W1712 mounts onto a heavy-duty
formed sheet steel cabinet stand. Use the
hardware in the cabinet hardware bag to com-
plete this assembly.
To assemble the cabinet stand, do these
steps:
1. Assemble the cabinet panels together as
shown in
Figure 4 with the supplied 5 ⁄
16
"-
18 x 3 ⁄
4
" hex bolts, 5 ⁄
16
" flat washers, 5 ⁄
16
"
lock washers and 5 ⁄
16
" hex nuts.
2. Attach the remaining side panel.
3. Secure the rubber feet to the bottom cor-
ners of the cabinet stand with the floor
pad hardware bag as shown in
Figure 5.
Cabinet Assembly
Front/Rear Panels
Mounting Locations
Side Panel