Woodstock Combination Model - Manual (Page 29)

-26-
MAINTENANCE
Lubrication
Since all bearings are sealed and permanently
lubricated, simply leave them alone until they
need to be replaced. Do not lubricate them.
For other items on this machine, an occasional
application of light machine oil is all that is nec-
essary. Before applying lubricant, wipe the
machine clean.
Your goal is to achieve adequate lubrication.
Too much lubrication will attract dirt and saw-
dust. Various parts of your machine could lose
their freedom of movement as a result.
Regular periodic maintenance on your Model
W1676 will ensure its optimum performance.
Make a habit of inspecting your sander each time
you use it. Check for the following conditions
and repair or replace when necessary.
1. Loose mounting bolts.
2. Worn switch.
3. Worn or damaged cords and plugs.
4. Damaged sanding belts or discs.
5. Any other condition that could hamper the
safe operation of this machine.
General
Table And Base
Tables can be kept rust-free with regular appli-
cations of products like Boeshield
® T-9. For long
term storage you may want to consider products
like Kleen Bore's Rust Guardit™.
Wear safety glasses dur-
ing the entire mainte-
nance process. Failure to
comply may result in
serious personal injury.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Disconnect power to the
machine when perform-
ing any maintenance,
assembly or adjust-
ments. Failure to do this
may result in serious
personal injury.
!