Sony CMT-HP7 - Manual (Page 16)

16 GB
1
Slide the lid open with your hand.
2
Insert a tape.
To remove the tape, lift up the tape from the
side as shown in the illustration.
3
Slide the lid close with your hand.
You can use TYPE I (normal) tape.
1
Load a tape.
2
Press TAPE A/B on the remote (or
FUNCTION on the unit repeatedly) until
“TAPE” appears.
3
Press PLAY MODE repeatedly to select
“
g ” to play one side, “ h ” to play
both sides, or “ j ”* to play both sides
repeatedly.
* The tape automatically stops after playing back
five times.
4
Press N on the remote (or TAPE
nN on the unit).
The tape starts playing.
Press TAPE nN on the unit again to
play the reverse side.
Other operations
Finding a point in a track (Cue
and Review)
To go forward
Press M during playback, then press N on
the remote (or TAPE nN on the unit) at the
desired point.
To go back
Press m during playback, then press N on
the remote (or TAPE nN on the unit) at the
desired point.
Tape – Play
Loading a tape
With the side
you want to
play/record
facing up.
Playing a tape
To Do this
Stop play Press x.
Pause Press X. Press again to resume
play.
Fast-forward or
rewind Press m/M.