Connections and setup, Connecting the projector to other devices, Before connecting – Sharp PG-A10X User Manual

Page 19: This projector can be connected to, Connecting the power cord

Advertising
background image

Connections and Setup

-15

Connecting the Projector to Other Devices

Before Connecting

Note

• Before connecting, be sure to turn off both the projector and the devices to be connected. After making all

connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.

• Be sure to read the operation manuals of the devices to be connected before making connections.

This projector can be connected to:

A computer using:

An RGB cable and a ø3.5 mm audio cable (commercially

available) (See page

16

.)

A DIN-D-sub RS-232C adaptor and an RS-232C

serial control cable (AN-C10RS) (sold separately)
(See page

20

.)

Component video or audio-visual equipment:

A VCR, Laser disc player or other audio-visual

equipment (See page

18

.)

A DVD player or DTV

*

decoder (See page

19

.)

*

DTV is the umbrella term used to describe the new

digital television system in the United States.

Connecting the Power
Cord

Plug the supplied power cord into
the AC socket on the rear of the pro-
jector.

Power cord

Supplied
accessory

Advertising