Sharp PG-A10X - Manual (Page 49)

Easy to Use Functions
-45
Video System
(Setting the
Video System)
The video input system mode is preset to “Auto”;
however, a clear picture from the connected audio-
visual equipment may not be received, depending
on the video signal difference. In that case, switch
the video signal.
Select “Video System” on the “Options” menu
and the appropriate video system.
Description of Video Systems
Note
• The video signal can only be set in INPUT 2 or
INPUT 3 mode.
• In “Auto”, images are displayed in PAL even if
PAL-N or PAL-M input signals are received.
Background
(Selecting a
Startup and Background Image)
Select “Background” on the “Options” menu
and the image displayed upon the projector’s
startup and when no signal is being sent to
the projector.
Description of Background Images
Note
• If the input signal has interference, the screen
will be displayed during interference.
Eco Mode
(Setting the Eco
Mode)
Select “ ” (Eco Mode) or “ ” (Standard
Mode) in “Eco Mode” on the “Options”
menu.
Description of Eco Mode
Note
• Although lamp life and noise are improved when
“Eco Mode” is set to “ ” (Eco mode), bright-
ness decreases by 20%.
• “Eco Mode” mode is factory preset to “
” (Stan-
dard mode).
Sharp
Blue
None
Selectable settings
PAL
SECAM
NTSC4.43
NTSC3.58
Description
When connected to PAL video
equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video
equipment.
Selectable settings
Sharp
Blue
None
Description
SHARP default image
Blue screen
Black screen
Brightness
80%
100%
Selectable settings
(Eco mode)
(Standard mode)
Power consumption
(When using AC 100V)
190 W
240 W
Lamp life
4,500 hours
3,000 hours