Samsung A930 User Manual
Page 41
Section 3: Call Functions
41
VoiceSignal™
Sect
ion 3
When VoiceSignal rejects an utterance, it displays a
message such as “Please repeat…” or “No match found.” If
you frequently experience these messages, you might be
able to get better recognition by adjusting the Sensitivity
setting toward Reject Less. If you frequently experience
false activations (VoiceSignal detects a wrong match), you
might be able to get better performance by adjusting the
Sensitivity setting toward Reject More.
•
Digit Dialing: Use the Digit Dialing menu to adapt digit
dialing to your voice.
•
Adapt Digits:
Lets you adapt digits, which can improve
voice recognition of phone numbers. Adaptation takes about
180 seconds.
•
Reset Digits:
Erases any digit adaptation you have done and
resets digit recognition to the factory default. If you have not
adapted digits, this option is grayed out.
•
Sound: You can customize the VoiceSignal user interface by
turning playback on or off for prompts, names, and numbers.
You can also change the speed and volume of name
playback.
•
Prompts:
Turns playback on or off for prompts such as
“Say a command.”
•
Digits:
Turns playback on or off for digits, for example, when
confirming a phone number.
•
Names:
Turns playback on or off for names.
•
Name Settings:
Adjusts the speed and volume of name
playback.
•
About: Displays information about VoiceSignal including
version number, build number, and device number.
You can also access the VoiceSignal Settings menu by
following these steps:
1. In standby mode, press the
key.
a930.book Page 41 Thursday, March 16, 2006 3:37 PM