Samsung A930 - Manual (Page 43)

Section 3: Call Functions 43
VoiceSignal™
Sect
ion 3
Digit Dial Adaptation
To access the Adapt Digits menu, follow these steps:
1. At the standby screen, press MENU. Use the right
navigation key to highlight SETTINGS & TOOLS.
2. Press Tools, then Voice Commands.
3. Press Voice Settings, then Digit Dialing.
4. Adapt Digits is highlighted. Press .
5. A short description of the Adapt Digits displays.
6. Read the description until you are comfortable to
proceed, then press .
7. Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four
digits appearing in the display.
Wait for the beep and repeat the digits using your normal
tone of voice.
8. After a moment, the phone plays back the recording and
prompts “Did the recording sound ok?” If the recording
was good, say “Yes.” If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then re-record.
Repeat this step until you’re satisfied with the recording.
9. After confirming that the recording sounds ok, repeat
the recording process with the next set of digits. After
ten sets of digits, the phone indicates that adaptation is
complete.
a930.book Page 43 Thursday, March 16, 2006 3:37 PM