Samsung A930 - Manual (Page 46)

46
Sect
ion 3
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in
your Contacts list. See page 69 for information on creating
a Contacts list.
1. In standby mode, press the key.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the earpiece.
3. Say “Call” at a distance of 3-12 inches from the phone in
a natural voice.
4. “Say the name or number” plays through the earpiece or
speakerphone--if it is enabled.
5. To use Name Dialing, say the name of the contact that
you want to dial.
6. The name that you said is repeated through the earpiece
and your phone dials the number.
7. If VoiceSignal is not sure of the number that you said, a
list of possible matches appears in the display.
8. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
9. The location is repeated through the earpiece and your
phone dials the number.
Send Text MSG
1. In standby mode, press the key.
a930.book Page 46 Thursday, March 16, 2006 3:37 PM