Samsung A930 - Manual (Page 45)

Section 3: Call Functions 45
VoiceSignal™
Sect
ion 3
• Go to <Menu>: Open any application installed on your device.
• Check <Item>: Provides details of your coverage, signal
strength, and battery level.
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply
speaking the digits into the phone. No training is
necessary, and Digit Dial is programmed to understand
natural speech.
1. In standby mode, press the key.
2. After a brief pause, a list of optional commands appears
in the display and the audio prompt “Say a command”
plays through the earpiece or speakerphone--if it is
enabled.
3. Say “Call” at a distance of 3-12 inches from the phone in
a natural voice.
4. “Say the name or number” plays through the earpiece.
5. To use Digit Dialing, say the area code and number that
you want to dial into the microphone, clearly and
naturally.
6. The number that you said is repeated through the
earpiece and your phone dials the number.
7. If VoiceSignal is not sure of the number that you said, a
list of possible matches appears in the display.
8. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
a930.book Page 45 Thursday, March 16, 2006 3:37 PM