Step 3: wheels & caps, Hardware – Spirit XG400 User Manual
Page 11
Advertising
7
e
Glide Trainer
XG400
1. Attach the transport wheels (77) to each bracket with the two bolts (44) and nuts (34). Partially tighten with
the wrenches provided (110 & 111). Over tightening the hardware won’t allow the wheels to rotate.
2. Snap the four end caps (67) onto the cup washers on the left & right pedal arm assemblies.
HARDWARE
STEP 3: Wheels & Caps
#44. 5/16” x 1-3/4”
Bolt (2 pcs)
#34. 5/16”
Nut (2 pcs)
Advertising