Spirit XG400 - Manual (Page 13)

9 e
Glide Trainer
XG400
1. Tilt the e•Glide Trainer to one side and put something under the unit for support and install the three levelers
(83) for that side. Tilt the unit to the other side and install those three levelers (83). Level the e•Glide Trainer
once it is positioned where it will be used. Screw the two middle levelers all the way in and the front and rear
levelers all the way in, then back them out about two or three turns. Level the unit using only the front and
rear levelers first, then adjust the middle levelers so they touch the floor. Make sure to lock the levelers when
finished.
2. Press the six plastic end caps (71) into the oval stabilizer tubes.
3. Unlock the black lever located near the flywheel at the end of the brake cable (90). This is locked for shipping
purposes, but also serves as a safety lock mechanism to prevent unauthorized use of this machine.
STEP 5: Levelers & End Caps