Sherbourn Technologies PT-7010A - Manual (Page 17)

17
Connection Diagram 3:
Connecting to the TV or
Projector using Component
Video
This configuration shows the PT-7010A connections to the “main”
video display where video output is taken from the Component
Video outputs (the Red/Blue/Green trio) labeled “MAIN” on the
back panel of the PT-7010A.
This configuration will give the best picture quality, especially if
the video source component output begins as a native Component
Video output. Remember that with the video transcoding feature,
the PT-7010A will still allow your Composite or S-Video source
inputs to up convert to the Component Video outputs, but you
should always connect the highest quality video signal available.
COMPONENT VIDEO Input on the TV
or Projector. There may be more than one
input on high end video screens