Sherbourn Technologies PT-7010A - Manual (Page 22)

22
Connection Diagram 8:
Connecting the AM and FM
Antennas
This configuration shows the AM and FM antenna connections.
The AM antenna should be a “loop” style antenna with two wires
that connect into the AM ANTENNA receptacles. The FM antenna
must terminate into an “F style” connector and has a 75 Ohm
impedance.
Position the AM and FM antennas where reception is best. The AM loop antenna that
has been included with the PT-7010A has been matched to the AM tuner for optimum
reception. If you choose to use an outdoor FM antenna, please observe proper safety
precautions regarding home wiring as outlined in the beginning of this manual.