Sennheiser EvolutionWireless EW 300 Series User Manual
Page 21
Using the devices
19
To switch the bodypack transmitter
off
:
̈
If necessary, deactivate the lock mode (see page 21).
To switch the bodypack transmitter
on
and to
deactivate the RF signal on switch-on
(offline
operation):
To
activate
the
RF signal
:
̈
Briefly press the
ON
/
OFF
button
ƹ
.
The bodypack transmitter transmits an RF signal. The transmission icon
ብ
is
displayed.
The red
ON
LED
lights up and the standard display “
Frequency/Name
”
appears on the display panel.
You can switch the bodypack transmitter on and deactivate the RF signal on switch-
on. For more information, see below.
̈
Press the
ON
/
OFF
button
ƹ
until “
OFF
” appears on the display panel. The red
ON
goes off and the display panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
ƹ
will cancel your entry
(ESC function) and return you to the current standard display.
̈
Press the
ON
/
OFF
button
ƹ
until “
RF Mute On?
” appears on the display panel.
̈
Press the
SET
button
º
.
The transmission frequency is displayed but the bodypack transmitter does not
transmit an RF signal. The transmission icon
ብ
is not displayed. When the pilot
tone function is activated on both bodypack transmitter and receiver, “
RF Mute
”
appears on the receiver’s display panel.
Use this function to save battery power or to prepare a bodypack transmitter for use
during live operation without causing interference to existing transmission links.
̈
Briefly press the
ON
/
OFF
button
ƹ
.
“
RF Mute Off
” appears on the display panel.
̈
Press the
SET
button
º
.
The transmission icon
ብ
is displayed again.
ON/OFF
ON/OFF
ON/OFF
SET
MHz
543.200
ew300 G3
MUTE
P
AF
ብ
ON/OFF
SET