Sennheiser EvolutionWireless EW 300 Series - Manual (Page 25)

Using the devices
23
SK 300
The MUTE switch
·
allows you to mute the audio signal or to deactivate the RF signal. Via the
“ Mute Mode ” menu item, you can set the desired function of the MUTE switch
·
:
The “ Push to mute ” and “ Push to talk ” menu items are only available in conjunction with the
RMS 1 external mute switch (optional accessory).
̈ From the “ Mute Mode ” menu item, select the desired setting (see page 28).
̈
Exit the operating menu.
̈
Slide the MUTE switch
·
to the left, to the position MUTE .
The bodypack transmitter reacts as indicated in the table.
The current state of the muting function or the RF signal is displayed on the display panel of
the bodypack transmitter. An additional display appears on the receiver’s display panel when
the pilot tone function is activated on both bodypack transmitter and receiver and, in
addition, this display has been activated via the “
Warnings ” menu item on the receiver
(see page 27).
Setting Slide the MUTE switch
· ...
Function
“ Disabled ” ... to the left (position MUTE ) None
“ RF On/Off ” ... to the left (position MUTE ) Deactivates the RF signal
(offline operation)
... to the right Activates the RF signal
(online operation)
“ AF On/Off ” ... to the left (position MUTE ) Mutes the audio signal
... to the right Unmutes the audio signal
Audio signal is muted
Transmitter’s display panel: “ MUTE ”
ቨ
is displayed
Receiver’s display panel: “ TX Mute ” is displayed *
* only when activated on the receiver (see above)
Audio signal is activated (muting is deactivated)
Transmitter’s display panel: “ MUTE ” ቨ is not displayed
Receiver’s display panel: “ TX Mute ” is not displayed
RF signal is deactivated
Transmitter’s display panel: Transmission icon
ብ
is not displayed
Receiver’s display panel: “ RF Mute ” is displayed *
* only when activated on the receiver (see above)
RF signal is activated
Transmitter’s display panel: Transmission icon
ብ
is displayed
·
MHz 543.200
ew300 G3
MUTE P
AF
ብ
ቨ