Sony SX-215 - Manual (Page 51)

User’s Guide
This controls whether the radio frequencies are set based on the radio configuration, or information from the access
point it connects to. Disabled means the radio defaults are used. Flexible means the access point settings are used if
present, but if not the radio default is used. Strict means the access point must provide regulatory frequency
information..
SET NW IROAM [ DISable | STRICT | FLEXible ]
(default = FLEXIBLE)
SH NW IROAM
Shows what International Roaming setting is currently configured.
sample output:
International Roaming = Flexible
SET NW DFS
Dynamic Frequency Select (802.11h)
This controls whether the available radio frequencies are set based on the radio configuration, or information from
the access point it connects to. Disabled means the radio defaults are used. Flexible means the access point settings
are used if present, but if not the radio default is used. Strict means the access point must provide frequency control
information...
SET NW DFS [ DISable | STRICT | FLEXible ]
(default = DISABLED)
SH NW DFS
Shows what Dynamic Frequency Select is currently configured.
sample output:
International Roaming = Flexible
SET NW REGDOMain
This field displays the region of operation for which the wireless interface is intended. Note that the possible
countries are pulled from the radio card and may differ depending on what card is used.
SET NW REGDOMain <country>
country = “xxx”, where xxx =
{ "US " , REGDOM_TEXT_US },
{ "USI" , REGDOM_TEXT_US_INDOOR },
{ "AU " , REGDOM_TEXT_AUSTRALIA },
{ "AT " , REGDOM_TEXT_AUSTRIA },
{ "ATI" , REGDOM_TEXT_AUSTRIA_INDOOR },
{ "BE " , REGDOM_TEXT_BELGIUM },
{ "BEI" , REGDOM_TEXT_BELGIUM_INDOOR },
{ "CA " , REGDOM_TEXT_CANADA },
{ "DK " , REGDOM_TEXT_DENMARK },
{ "DKI" , REGDOM_TEXT_DENMARK_INDOOR },
{ "FI " , REGDOM_TEXT_FINLAND },
{ "FII" , REGDOM_TEXT_FINLAND_INDOOR },
Document #40181-420 Rev. B 51