Set port p1 nbuf [enable | disable, Set port p1 noinbusy, Set port p1 poll – Sony SX-215 User Manual

Page 55: Set port p1 psta, Set port p1 sojbusy, Cl port <port> job, User’s guide

Advertising
background image

User’s Guide

Enable or disable input wait mode. If enabled, this mode delays polling for input from the printer at the end of a job
for one poll period. If disabled, the printer is polled as soon as the last byte in the job is sent to it..

SET PORT P1 INWT [ENable | DIsable]

(default = disable)

SET PORT P1 NBUF [ENable | DIsable]

Enable or disable no buffer mode. If enabled, data is passed directly from the network to the printer without
buffering. Depending on the network set up and application, buffering may improve performance or reduce it.

SET PORT P1 NBUF [ENable | DIsable]

(default = enable)

SET PORT P1 NOINBUSY

Enable or disable noinput while busy mode. If enabled, the printer will not be polled to see if it has data to send
back to the host if it is reporting busy status on the interface.

SET PORT P1 NOINBUSY [ENable | DIsable]

(default = disable)

SET PORT P1 POLL

Set interval between input polls (msec). The value is meaningless if bidirectional mode is disabled.

SET PORT P1 POLL <nn>

(default = 50 msec)

SET PORT P1 PSTA

Enable or disable PJL status initialization.

SET PORT P1 PSTA [ENable | DIsable]

(default = disabled)

SET PORT P1 SOJBUSY

If the printer is busy when a print job is ready to start, this parameter determines how long the server waits after the
printer becomes ready before starting to send data to it.

SET PORT P1 SOJBUSY <nn>

(default = 100 msec)

CL PORT <port> JOB

Document #40181-420 Rev. B

55

Advertising