Usb port commands, Set port u1 psta, Set port u1 nbuf [enable | disable – Sony SX-215 User Manual

Page 56: Server information commands, Set server description, Set server name, Set snmp getcomm, User’s guide

Advertising
background image

User’s Guide

This command aborts the currently active job on the port specified. If the remote host is still connected, any further
data received will be discarded.

CL PORT P1 JOB

USB Port Commands

SET PORT U1 PSTA

Enable or disable PJL status initialization.

SET PORT U1 PSTA [ENable | DIsable]

(default = disabled)

SET PORT U1 NBUF [ENable | DIsable]

Enable or disable no buffer mode. If enabled, data is passed directly from the network to the printer without
buffering. Depending on the network set up and application, buffering may improve performance or reduce it.

SET PORT U1 NBUF [ENable | DIsable]

(default = enable)

Server Information Commands

SET SERVEr DEscription

Sets the server description string

SET SERVEr DEscription <description-string>

SET SERVEr NAme

Sets server node name

SET SERVEr NAme <name>

(default = “SLXxxxxxx”, where xxxxxx are the last 6 hex digits of
the MAC address)

SET SNMP GETCOMM

Get Community Name

SET SNMP GETCOMM <string>

(default = “public”)

Document #40181-420 Rev. B

56

Advertising