Savin 2535P - Manual (Page 20)

Copy Mode
9
1
D
Press the
{{{{Interrupt}}}} key again.
The machine resumes the printing
job of the received fax document.
Resuming the interrupted
copying job
A Reset the previous original.
B Press the {{{{Start}}}} key.
The machine resumes the inter-
rupted copy run.
Copying and Multi-accessing
If you want to make copy while using
another function, follow the proce-
dure below.
A
Press the
{{{{Interrupt}}}} key.
The interrupt display appears on
the panel display.
B
Set originals, and then press the
{{{{Start}}}} key.
The machine interrupts the job that
is printing and starts copying your
originals.
C
When copying is complete, re-
move your originals and the cop-
ies.
D
Press the
{{{{Interrupt}}}} key again.
The previous job settings will be
restored and the machine will con-
tinue from where it left off.
Note
❒ Machine operations are differ-
ent depending “Print Priority”
(
⇒ P.34 “General Features 1 /
2
”) or
“User Code Management” (
⇒
P.34 “General Features 1 /
2
”) set-
tings.
Reference
⇒ P.17 “Multi-Access”
❖ ❖ ❖ ❖ When “Print Priority” = “Fax”,
“Printer”, or “Display” (default)
The machine completes the op-
eration of the function set by
Print priority before performing
the operation of another func-
tion.
Limitation
❒ While the machine is per-
forming two-sided printing
in fax m ode, you cannot
make two-sided copies until
the printing ends.
❖ ❖ ❖ ❖ When “Print Priority” = “Inter-
leave”
The machine performs the oper-
ations in the order in which they
are initiated. If another function
is initiated during operation,
the machine completes the cur-
rent operation before perform-
ing the operation of the function
initiated.
AdonisC2-sysEN122F_FM.book Page 9 Thursday, February 1, 2001 1:46 PM