2configuring the network with the operation panel – Savin 2535P User Manual
Page 33
Configuring the Network
22
2
Configuring the Network with the
Operation Panel
This section describes the basic procedures. Please set the settings appropriate
for the network you are using.
Important
❒ These settings should be set by your systems administrator or after consulting
with your systems administrator.
The following table shows the operation panel settings and their default set-
tings. These are included in “TCP/IP Menu” of the ”Network“ menu.
*1
❍ means that this protocol is active.
A
Press
{{{{User Tools/Counter}}}}.
The “User Tools Main Menu” appears.
Setting Name
Value
IP Address
011.022.033.044
Subnet Mask
000.000.000.000
Gateway Address
000.000.000.000
Access Control
000.000.000.000
Access Mask
000.000.000.000
Network Boot
None
NW Frame Type
Auto Select
Effective Protocol
TCP/IP
❍
*1
NetWare
❍
*1
NetBEUI
❍
*1
AppleTalk
❍
*1
Ethernet Speed
Auto
AdonisC2-sysEN122F_FM.book Page 22 Thursday, February 1, 2001 1:46 PM